Hair Stick Beading Instructions and Tips
Some examples of hair stick clip-ons
Hair sticks can be fashioned by using a 1
inch eye pin and a touch of glue to the inside of the hole drilled in the
end of each stick.
A 2x2mm crimp bead can be placed inside the hole before adding the eye
pin, to take up any slack that may be present if the hole is a bit large.
* You can also stick the end of a toothpick in the hole next to the eye
pin, breaking it off cleanly, and file down any excess toothpick with a
nail file, emery board or diamond tip reamer attachment.
You will need the
following items:
1
hair stick, end drilled
1 1", 2" or 4 inch
head pin or eye pin for stacking
beads or one
3 inch hat stick
pin, for a longer, sturdier pin decoration.
1
Bead cap
(optional)
1 crimp
bead, and a dab of
E-6000® Jewelry
and Craft Adhesive to secure the pin
Glass beads,
Czech
pressed glass,
Foil Beads.
Bead caps and an eye pin or eye screw can be used to
camouflage the end
of the hair stick, thereby adding a touch of flair to the finished
product
Many
Horses Jewelry Supply
Copyright ©
2008 by Many Horses Jewelry Supply.